Siemens AC75 - Manual (Page 512)

AC75 AT Command Set
20.3 AT^SCPOL
s
AC75_ATC_V01.002 Page 512 of 569 10/30/06
Confidential / Released
Notes
• The pins will be polled at every TDMA frame interrupt, i.e. every 4.616ms. In SLEEP mode, the frequency of
polling is reduced, as polling will be done only when the module shortly suspends power saving when CTS is
activated. So in SLEEP mode polling intervals are extended to a range from 0.9s to 2.7s.
After a state change has been detected the "
^SCPOL
" URC is issued if the state of the pin remains stable for
8 TDMA frames (= 36.93ms) in Normal mode, or accordingly, 0.9s to 2.7s in SLEEP mode.
• If the of one or more of the polled pins has changed since polling has been performed last time, or
since a particular pin or its entire port have last been queried with
AT^SGIO
, polling will be suspended to send
a URC. There will be one URC reported for each polled pin whose has changed, and one for each
polled port with one or more changed pins.