Siemens AC75 - Manual (Page 422)

AC75 AT Command Set
15.2 AT^SRSM
s
AC75_ATC_V01.002 Page 422 of 569 10/30/06
Confidential / Released
15.2 AT^SRSM Remote SIM Access Message
The
AT^SRSM
command is used to transfer SAP messages between devices acting as SAP server and client. It
is applicable for XSAP data format only, for details please refer to the parameter of the
AT^SRSA
command. The write command transports SAP messages to an SAP server or SAP client.
Syntax
Unsolicited Result Code
^SRSM: , [, [, [, ]]]
This URC is issued by an ME acting as SAP server or client to transfer SAP message data.
Parameter Description
RSA device identification
Number assigned by the host on RSA activation via
AT^SRSA
, parameter .
RSA message identification
For details refer to Section
15.2.1 , SAP Request Message Parameters and Section 15.2.2 , SAP Response Mes-
sage Parameters .
RSA message data
For details refer to Section
15.2.1 , SAP Request Message Parameters and Section 15.2.2 , SAP Response Mes-
sage Parameters .
RSA message data length
For details refer to Section
15.2.1 , SAP Request Message Parameters and Section 15.2.2 , SAP Response Mes-
sage Parameters .
RSA message result code
For details refer to Section
15.2.1 , SAP Request Message Parameters and Section 15.2.2 , SAP Response Mes-
sage Parameters .
Test Command
AT^SRSM=?
Response(s)
OK
Write Command
AT^SRSM=
, [, [, [, ]]]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS - + - + + + + - - -
(num)
(num)
(str)
(num)
(num)