14 at^sgact query all pdp context activations, Ac75 at command set – Siemens AC75 User Manual
Page 339
AC75 AT Command Set
11.14 AT^SGACT
s
AC75_ATC_V01.002
Page 339 of 569
10/30/06
Confidential / Released
11.14
AT^SGACT Query all PDP context activations
Syntax
Command Description
The test command returns supported interfaces and states.
The read command lists the activation states for all activated PDP contexts of the ME. Contexts, which are cre-
ated internally by the GPRS modem compatibility commands, will displayed only, if they are activated. The Out-
put of this command is unsorted.
The exec command returns the sum of all activated PDP contexts of the ME.
Parameter Description
Interface
Indicates the interface on which a particular PDP context was defined. Every PDP context defined with the com-
mand
or internally by the GPRS modem compatibility commands is identified one-to-one by its
(local) context identifier and the interface on which it was defined. The range of supported interfaces is returned
by the test command.
0
ASC0 or Multiplex channel 1
1
ASC1 or Multiplex channel 2
2
USB or Multiplex channel 3
PDP context identifier
The interface local identifier which was used to define a PDP context using the command
or which
was created internally by using the GPRS modem compatibility commands
. The range
of supported values is returned by the
test command. Values 3 and 4 will be used by the GPRS
modem compatibility commands
if no context identifier was specified as the command
was invoked.
Test Command
AT^SGACT=?
Response(s)
^SGACT:
(range of supported
OK
Read Command
AT^SGACT?
Response(s)
[^SGACT:
[^SGACT:
[^SGACT: ...]
OK
Exec Command
AT^SGACT
Response(s)
^SGACT:
OK
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
+
+
+
+
+
+
+
-
+
-
(num)
(num)