Ac75 at command set – Siemens AC75 User Manual
Page 186
![background image](/manuals/154345/186/background.png)
AC75 AT Command Set
7.22 AT^SLCC
s
AC75_ATC_V01.002
Page 186 of 569
10/30/06
Confidential / Released
EXAMPLE 2
^SLCC:
End of current list
^SLCC: 1,0,0,0,0,1,"1234567",129,"Called
Party"
B-Party has accepted the call, connection estab-
lished.
^SLCC:
End of current list.
atd23456;
We start a second voice call.
OK
"OK" response is issued immediately because
another call is already active (cf.
^SLCC: 1,0,1,0,0,0,"1234567",129,"Called
Party"
The active call is automatically put on hold, triggering
the display of the list.
^SLCC: 2,0,2,0,0,1,"23456",129
The second call has already started before the indi-
cation for the held call could be displayed
^SLCC:
End of current list.
^SLCC: 1,0,1,0,0,0,"1234567",129,"Called
Party"
The identical list is displayed again, triggered by the
start of the second voice call.
^SLCC: 2,0,2,0,0,1,"23456",129
The status of the second list entry has already been
displayed with the previous URC.
^SLCC:
End of current list.
^SLCC: 1,0,1,0,0,0,"1234567",129,"Called
Party"
The held call doesn't change status right now.
^SLCC: 2,0,3,0,0,1,"23456",129
The second call is now alerting the B-Party.
^SLCC:
End of current list.
^SLCC: 1,0,0,0,0,1,"1234567",129,"Called
Party"
The held call doesn't change status right now.
^SLCC:
End of current list: the B-Party of the second call has
not accepted the call in time, the second call has
ended.
NO CARRIER
The second call has ended.
^SLCC:
list is now empty: B-Party has ended the first call.
NO CARRIER
The first call has ended.
^SLCC: 1,1,4,0,0,1,"1234567",129
Incoming voice call is signalled.
Display is triggered by the incoming call, but the cur-
rent status of the call at the time of display already
comprises an active traffic channel.
^SLCC:
End of current list.
RING
Incoming call is signalled.
^SLCC: 1,1,4,0,0,1,"1234567",129
The incoming call had a traffic channel assigned
from the start.
This second identical display is triggered by the traf-
fic channel assignment.
Since the traffic channel was already indicated in the
previous URC, both instances of the URC contain
identical information.
^SLCC:
End of current list.
RING
Incoming call is signalled.
ata
Incoming call is accepted.
OK
call is established.
^SLCC: 1,1,0,0,0,1,"1234567",129
The call is now active.
^SLCC:
End of current list.
ath
Hang up the call.
OK
hang up complete.
^SLCC:
The list of current calls is empty again.
- A75
- SXG75
- CX65
- A50
- C30
- A65
- SL75
- A35
- M75
- SX1
- C55
- M55
- SL45
- S65
- S75
- CF75
- CFX65
- AX75
- C75
- M65
- CX75
- ST60
- U15
- CF62
- C45
- C45
- Xelibri 8
- Xelibri 7
- SL45i
- SL42
- Xelibri 3
- ST55
- SL55
- C62
- C62
- Xelibri 6
- M50
- Xelibri 2
- Xelibri 4
- A57
- A36
- Xelibri 1
- Xelibri 5
- C70
- Gigaset SL 740
- Mobile Phone C35i
- 4110
- RS-485
- A55
- Gigaset SL55
- Gigaset C450 IP
- Gigaset E45
- S42
- Gigaset 150
- XT75
- SL370
- M30
- A40
- S56
- TDMA 800
- S40
- 150 H
- MT50
- C60
- SL 42
- CL50
- 1168
- C35i
- A52
- SL56
- A60
- SX66
- 4000
- MOVIEMATE 50
- XT55 AVL
- XT55
- 3000
- Gigaset 200
- Mobile
- Mux_guide_v06
- Gigaset S450 IP
- MC60
- Hicom 300E
- SF65
- CXV70
- CXV65
- 8WD44
- C61
- C56
- S45i
- MC55
- CX70
- PEGASUS-DTC AX72
- C70 CT70
- 4010
- Gigaset SL1
- Gigaset C100 DECT
- Gigaset S1
- 4000i
- Gigaset 3000 Classic