Ac75 at command set – Siemens AC75 User Manual
Page 395
AC75 AT Command Set
13.23 AT^SMGL
s
AC75_ATC_V01.002
Page 395 of 569
10/30/06
Confidential / Released
13.23
AT^SMGL List Short Messages from preferred store without set-
ting status to REC READ
The write command allows to select a status type and lists, from the message storage
, all messages
that currently have the specified
. The major difference over the standard command
is that the
status of the listed messages remains u n c h a n g e d (unread remains unread).
The execute command is the same as the write command, but uses the given default of
.
Syntax
Notes
• The selected
can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section
Restricted access to SIM data after SIM PIN authentication
for further detail.
• If the ME is Java controlled, take into account that the AT Command API can handle responses up to a length
of 1024 bytes. To avoid any longer re-sponses it is recommended not to read the entire range of short mes-
sage entries at a time.
Test Command
AT^SMGL=?
Response(s)
same as
Exec Command
AT^SMGL
Response(s)
^SMGL:
, see "Section
.)
OK
Write Command
AT^SMGL=
Response(s)
same as
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
+
+
+
+
+
+
+
-
+
-