Siemens AC75 - Manual (Page 188)

AC75 AT Command Set
7.24 AT+CRC
s
AC75_ATC_V01.002 Page 188 of 569 10/30/06
Confidential / Released
7.24 AT+CRC Set Cellular Result Codes for incoming call indication
The
AT+CRC
command controls whether or not to use the extended format of incoming call indication.
=1 may lead to connection failure, if the application (e.g. WinFax) waits for the default URC.
Syntax
Unsolicited Result Codes
URC 1
RING
Indicates incoming call to the TE if =0.
URC 2
+CRING:
Indicates incoming call to the TE if =1.
Parameter Description
[0] (&F) Disable extended format
1 Enable extended format
“REL ASYNC“ Asynchronous non-transparent
“FAX“ Facsimile
“VOICE“ Voice
“GPRS“ , [,[][, ]] GPRS network request for
PDP context activation
Test Command
AT+CRC=?
Response(s)
+CRC:
(list of supported s)
OK
ERROR
Read Command
AT+CRC?
Response(s)
+CRC:
OK
ERROR
Write Command
AT+CRC=
[ ]
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 - + + + + + + - + -
(num)(&W)(&V)
(str)