Siemens AC75 - Manual (Page 336)

AC75 AT Command Set
11.12 AT+CGREG
s
AC75_ATC_V01.002 Page 336 of 569 10/30/06
Confidential / Released
11.12 AT+CGREG GPRS Network Registration Status
AT+CGREG
write command enables presentation of URC "
+CGREG
: " when =1 and ME's GPRS net-
work registration status changes, or URC "
+CGREG
: , , " when =2 and the current net-
work cell changes.
AT+CGREG
read command queries the current URC presentation status and which shows whether the
network has currently indicated the registration of the ME. Location information elements and are
returned only if =2 and ME is registered to the network.
Syntax
Unsolicited Result Codes
URC 1
+CGREG:
Indicates a change in the ME's GPRS network registration status.
URC 2
+CGREG: , ,
Indicates a change in the ME's GPRS network registration status or a change of the network cell including
location information.
Parameter Description
0 (&F)(P) Disable network registration unsolicited result code
1 Enable network registration URC "
+CGREG
: "
2 Enable network registration URC "
+CGREG
: , , "
Test Command
AT+CGREG=?
Response(s)
+CGREG:
(list of supported s)
OK
Read Command
AT+CGREG?
Response(s)
+CGREG:
, [, , ]
OK
Write Command
AT+CGREG=
[ ]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 + + + + + + + - + -
(num)