Cgeqmin, Pdp_type, Transfer delay – Siemens AC75 User Manual

Page 322: S), (list of, Traffic handling priority, Ac75 at command set

AC75 AT Command Set

11.7 AT+CGEQMIN

AC75_ATC_V01.002

Page 322 of 569

10/30/06

Confidential / Released

This parameter indicates the targeted time between request to transfer an SDU at one SAP to its delivery at the

other SAP, in milliseconds.
[0]

subscribed value

10...150

(value needs to be divisible by 10 without remainder)

200...950

(value needs to be divisible by 50 without remainder)

1000...4000

(value needs to be divisible by 100 without remainder)

This parameter specifies the relative importance for handling of all SDUs belonging to the UMTS bearer com-

pared to the SDUs of the other bearers.
[0]

subscribed

1
2
3

Packet Data Protocol Type
“IP“

Notes

• If parameters are not defined, the parameter default values depend on the HLR-stored subscribed default val-

ues.

• Definitions of parameters can be found in 3GPP TS 23.107

(num)

(str)