Siemens AC75 - Manual (Page 213)

AC75 AT Command Set
8.10 AT^MONP
s
AC75_ATC_V01.002 Page 213 of 569 10/30/06
Confidential / Released
8.10 AT^MONP Monitor neighbour cells
The
AT^MONP
supplies information of up to six neighbour cells. There are two ways to retrieve the information:
once on request by using the execute command or automatically every seconds by using the write
command. To stop the periodic presentation type "AT" or "at".
Syntax
Parameter Description
Display period in seconds
1...254
Notes
• Due to the fact that not all necessary information of the neighbour cells can be decoded during a connection,
there are several constraints to be considered:
- Only neighbour cells that have already been visible in IDLE mode will be further updated, as long as they
are still included in the list.
- Though new neighbour cells can be added to the list (e.g. due to handover), their C1 and C2 parameters
cannot be displayed until the connection is released. In this case "-" is presented for C1 and C2.
- To some extent, the cell monitoring command
AT^SMONC
covers the same parameters. The receiving
level, for example, can be queried with both commands. Yet the resulting values may be slightly different,
even though obtained over a time period of a few seconds. This is quite normal and nothing to worry about,
as the cell information is permanently updated.
• For compatibility with earlier products and to support legacy applications, any input character may be used to
stop the output in certain cases (depending on the settings of
AT+IPR
and
AT+CMUX
).
• If the ME is Java controlled, periodic retrieval of cell information using the write command
AT^MONP
= is not supported. If periodic cell information is required simply repeat the execute com-
mands at regular intervals.
Test Command
AT^MONP=?
Response(s)
^MONP:
(list of supported s)
OK
Exec Command
AT^MONP
Response(s)
See: Section 8.10.1 , AT^MONP responses
OK
Write Command
AT^MONP=
Response(s)
See: Section 8.10.1 , AT^MONP responses
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS - + + + + + + - - -
(num)