Siemens AC75 User Manual

Page 113

AC75 AT Command Set

4.7 AT+IFC

AC75_ATC_V01.002

Page 113 of 569

10/30/06

Confidential / Released

Notes

• When using XON/XOFF flow control (

=1,x or

=3,x) in data mode,

should not be used

while the data transmission is paused with XOFF. Before entering the command mode with

the paused

transmission should be resumed using the XON character.

• For compatibility reasons, the

command can be used in Multiplex mode, though the settings will not

take effect. However, be aware that whenever you use the

write command in Multiplex mode and

then save the current configuration to the user profile with

, the changed

setting will become

active after restart.

• The two commands

and

influence each other, i.e. settings made with

apply to

and, vice versa,

changes the

setting.