Mode, S an, Oper – Siemens AC75 User Manual
Page 196: Opstatus, Umeric, Ac75 at command set
AC75 AT Command Set
8.2 AT+COPS
s
AC75_ATC_V01.002
Page 196 of 569
10/30/06
Confidential / Released
Parameter Description
Status
0
Unknown
1
Operator available
2
Current operator
3
Operator forbidden
Operator
If test command: Operator name in long alphanumeric format and numeric format.
If read command: Operator name as per
.
If write command: Operator name in numeric format.
Parameter values 0 and 1 are stored non-volatile in the AC75.
0
(D)
Automatic mode;
field is ignored.
1
Manual operator selection
Write command requires
in numeric format, i.e.
shall be 2.
Read command returns the current
and the currently selected
. If no operator is selected,
are omitted.
2
Manually deregister from network and remain unregistered until
=0 or
1 or 4 is selected.
3
Set only
read command).
4
Automatic / manual selection; if manual selection fails, automatic mode
field will be present).
Read Command
AT+COPS?
Response(s)
+COPS:
[,
OK
ERROR
Write Command
AT+COPS=
Response(s)
OK
ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07
±
+
+
+
+
+
+
-
-
-
(num)
(str)
(num)(&V)