11 at^smong gprs monitor, Ac75 at command set – Siemens AC75 User Manual
Page 215
![background image](/manuals/154345/215/background.png)
AC75 AT Command Set
8.11 AT^SMONG
s
AC75_ATC_V01.002
Page 215 of 569
10/30/06
Confidential / Released
8.11
AT^SMONG GPRS Monitor
The
command supplies GPRS specific cell information. There are two ways to retrieve the informa-
tion: once on request by using the execute command or automatically every
seconds by using the
write command. To stop the periodic presentation type "AT" or "at".
Syntax
Parameter Description
1
Cell Info Table
Display period in seconds
If
is omitted the cell data will be presented only once on a single line (as if Execute command was
issued).
is given, the cell data will be listed repeatedly on 10 data lines. Every 10
th
data line is followed by
the header, simply to repeat the column titles.
1...100
Test Command
AT^SMONG=?
Response(s)
^SMONG:
(list of supported
s), (list of supported OK ERROR +CME ERROR Exec Command AT^SMONG Response(s) GPRS Monitor OK ERROR +CME ERROR Write Command
Cell Info Table (see: Section
]
Response(s)
^SMONG:
GPRS Monitor
Cell Info Table (see: Section
OK
ERROR
+CME ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
+
+
+
+
+
+
+
-
-
-
(num)
(num)