Siemens AC75 - Manual (Page 515)

AC75 AT Command Set
20.6 AT^SGIO
s
AC75_ATC_V01.002 Page 515 of 569 10/30/06
Confidential / Released
20.6 AT^SGIO Get IO state of a specified pin or port
Syntax
Parameter Description
This can be either an already configured or an already opened .
State read on this .
0 Low for
1 High for
0...1023 For
Note
• If one gets the state of a port whose width is less than 10 bits, the bits of that are more significant
than the MSB of the port are set to zero.
Test Command
AT^SGIO=?
Response(s)
^SGIO:
(list of supported s)
OK
Write Command
AT^SGIO=
Response(s)
^SGIO:
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS - + + + + + + - + -
(num)
(num)