Siemens AC75 - Manual (Page 35)

AC75 AT Command Set
2.2 AT&V
s
AC75_ATC_V01.002 Page 35 of 569 10/30/06
Confidential / Released
Table 2.2: Current configuration on ASC1 and MUX channels 2 and 3 (example)
PIN authentication done No PIN authentication
ACTIVE PROFILE:
E1 Q0 V1 X4 &C1 &D0 &S0 \Q0 \V1
S0:000 S3:013 S4:010 S5:008
+CR: 0
+CRC: 0
+CMGF: 1
+CSDH: 0
+CNMI: 0,0,0,0,1
+ICF: 3
+IFC: 0,0
+ILRR: 0
+IPR: 115200
+CMEE: 2
^SMGO: 0,0
+CSMS: 0,1,1,1
^SACM: 0,"000000","000000"
^SLCC: 0
^SCKS: 0,1
^SSET: 0
+CREG: 0,1
+CLIP: 0,2
+CAOC: 0
+COPS: 0,0,"operator"
+CGSMS: 3
OK
ACTIVE PROFILE:
E1 Q0 V1 X4 &C1 &D0 &S0 \Q0 \V1
S0:000 S3:013 S4:010 S5:008
+CR: 0
+ICF: 3
+IFC: 0,0
+ILRR: 0
+IPR: 115200
+CMEE: 2
^SCKS: 0,1
^SSET: 0
+CGSMS: 3
OK