Siemens AC75 - Manual (Page 459)

AC75 AT Command Set
18.5 AT+CMUT
s
AC75_ATC_V01.002 Page 459 of 569 10/30/06
Confidential / Released
18.5 AT+CMUT Mute control
The
AT+CMUT
command mutes the microphone input. The command can be used in all audio modes (1 to 6) and
during a voice call only. See
AT^SNFS
for more details on the various audio modes. As alternative, you can use
the
AT^SNFM
command.
During an active call, users should be aware that when they switch back and forth between different audio modes
(for example handsfree on/off) the value of does not change, i.e. the microphone mode is retained until
explicitly changed.
Syntax
Parameter Description
0 (P) Mute off
1 Mute on
Test Command
AT+CMUT=?
Response(s)
+CMUT:
(list of supported s)
OK
Read Command
AT+CMUT?
Response(s)
+CMUT:
OK
ERROR
+CME ERROR:
Write Command
AT+CMUT=
Response(s)
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 - + + + + + + - + -
(num)