Siemens AC75 - Manual (Page 319)

AC75 AT Command Set
11.7 AT+CGEQMIN
s
AC75_ATC_V01.002 Page 319 of 569 10/30/06
Confidential / Released
11.7 AT+CGEQMIN 3G Quality of Service Profile (Minimum accept-
able)
Syntax
Command Description
The test command returns values supported as a compound value.
The read command returns the current settings for each defined context.
The write command allows the TE to specify a Quality of Service Profile for the context identified by the (local)
context identification parameter which is checked by the MT against the negotiated profile returned in the
Activate/Modify PDP Context Accept message.
A special form of the write command,
AT+CGEQMIN
= causes the requested profile for context number
to become undefined.
AT&F
and
ATZ
will undefine the QoS profiles of every context which is not active or not online.
Parameter Description
Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is
used in other PDP context-related commands.
1...2
Test Command
AT+CGEQMIN=?
Response(s)
+CGEQMIN:
, (list of supported s), (list of supported
UL>
s), (list of supported s), (list of supported s),
(list of supported s), (list of supported s), (list of
supported s), (list of supported s), (list of supported
s), (list of supported s), (list of
supported s), (list of supported s)
OK
Read Command
AT+CGEQMIN?
Response(s)
[+CGEQMIN: , , , ,
, , ,
size>
, , , ,
, ]
[+CGEQMIN: ...]
Write Command
AT+CGEQMIN=
[ [, [, [, [,
[, [, [,
size>
[, [, [,
SDUs>
[, [, ]]]]]]]]]]]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
3GPP TS 27.007 + + + + + + + - + -
(num)