Siemens AC75 - Manual (Page 184)

AC75 AT Command Set
7.22 AT^SLCC
s
AC75_ATC_V01.002 Page 184 of 569 10/30/06
Confidential / Released
state of the call
0
Active
1 Held
2 Dialing (MOC)
3 Alerting (MOC)
4 Incoming (MTC)
5 Waiting (MTC)
bearer/teleservice
0
Voice
1 Data
2 Fax
3 Voice followed by data, voice mode (only in connection with single numbering
scheme
AT+CSNS
)
4 Alternating voice/data, voice mode (only in connection with single numbering
scheme
AT+CSNS
)
5 Alternating voice/fax, voice mode (only in connection with single numbering
scheme
AT+CSNS
)
6 Voice followed by data, data mode (only in connection with single numbering
scheme
AT+CSNS
)
7 Alternating voice/data, data mode (only in connection with single numbering
scheme
AT+CSNS
)
8 Alternating voice/fax, fax mode (only in connection with single numbering
scheme
AT+CSNS
)
9 Unknown
0 Call is not one of multiparty (conference) call parties
1 Call is one of multiparty (conference) call parties
0 No traffic channel assigned. Transmission of DTMF tones not possible.
1 Traffic channel is assigned and the progress indicator IE has been received
(call setup) or a voice connection has an active state. The parameter indicates
that the audio path is activated. DTMF tones can be sent with
AT+VTS
. See
also note below.
Phone number in format specified by
Type of address octect
145
Dialing string includes international access code character '+'
129 Otherwise
(num)
(num)
(num)
(num)
(str)
(num)