Siemens AC75 - Manual (Page 524)

AC75 AT Command Set
21.2 AT^SJNET
s
AC75_ATC_V01.002 Page 524 of 569 10/30/06
Confidential / Released
Note
• The authentication mode for CSD and GPRS is always PAP.
Examples
EXAMPLE 1
This example illustrates how to configure a profile for circuit switched network access: The dialup phone num-
ber is +49800654321, user name is "user1", password is "dialup123", and the primary DNS has IP address
"145.146.147.148". The phone number does not contain additional characters, therefore the destination is an
analog device (default) and the bitrate is 9600 bps (default).
EXAMPLE 2
Same example as above, but the phone number contains additional characters for ISDN and 14400bps.
AT^SJNET="CSD", "+49800654321", "user1", "dialup123", "145.146.147.148"
^SJNET: "csd","+49800654321","user1","dialup123","145.146.147.148",30
OK
AT^SJNET="CSD", "i+49800654321h", "user1", "dialup123", "145.146.147.148"
^SJNET: "csd","i+49800654321h","user1","dialup123","145.146.147.148",30
OK