Siemens AC75 - Manual (Page 231)

AC75 AT Command Set
9.5 AT+CCUG
s
AC75_ATC_V01.002 Page 231 of 569 10/30/06
Confidential / Released
state of the call
0
(D) no information
1 suppress outgoing access
2 suppress preferential CUG
3 Suppress preferential CUG and Outgoing Access.
Notes
• The active settings for omitted parameters are retained without changes.
• Explicit CUG invocation means that at each call setup, CUG information is added to the called number.
• Upon delivery, settings are predefined with
=0,
=10,
=0.
These delivery defaults cannot be recalled automatically.
• When starting a call with
ATD
, Parameter 'G' or 'g' of command
ATD
will have no effect if the option selected
for this single call is identical to the option already selected with
AT+CCUG
.
• Current settings are saved in the ME automatically.
•
ATZ
or
AT&F
do not influence the current settings.
• some combinations of parameters may lead to rejection of CUG calls by the network. For more information,
please consult GSM 04.85
(num)