Siemens AC75 - Manual (Page 376)

AC75 AT Command Set
13.9 AT+CMSS
s
AC75_ATC_V01.002 Page 376 of 569 10/30/06
Confidential / Released
13.9 AT+CMSS Send short messages from storage
The write command sends message with location value from message storage to the network
(SMS-SUBMIT or SMS-COMMAND). If new recipient address is given for SMS-SUBMIT, it shall be used
instead of the one stored with the message. Reference value is returned to the TE on successful message
delivery. Value can be used to identify message upon unsolicited delivery status report result code.
If the optional parameter is given, the old status of the short message at remains unchanged
(see ).
Syntax
Test Command
AT+CMSS=?
Response(s)
OK
Write Command
If text mode (
AT+CMGF
=1):
AT+CMSS=
[, [, ]]
Response(s)
+CMSS:
[, ]
OK
If sending fails
ERROR
+CMS ERROR
Write Command
If PDU mode (
AT+CMGF
=0):
AT+CMSS=
[, [, ]]
Response(s)
+CMSS:
[, ]
OK
If sending fails
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.05 + + + + + + + - - -