Siemens AC75 - Manual (Page 356)

AC75 AT Command Set
12.5 AT+FRS
s
AC75_ATC_V01.002 Page 356 of 569 10/30/06
Confidential / Released
12.5 AT+FRS Receive Silence
=n causes the TA to report an OK result code to the TE after the specified period of silence was detected
on the line.
The command is aborted if any character is received by the TE. The modem discards the aborting character and
issues an OK result code. An ERROR response code results if this command is issued while the mode is on-
hook.
Syntax
Parameter Description
Number of 10 millisecond intervals
0...255
Write Command
AT+FRS=
Response(s)
OK
If error is related to ME functionality:
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
TIA/EIA-578 - + - + + - - - - -
(num)