Ac75 at command set – Siemens AC75 User Manual

Page 161

AC75 AT Command Set

7.4 ATD>

AC75_ATC_V01.002

Page 161 of 569

10/30/06

Confidential / Released

Notes

• This command may be aborted generally by receiving a character during execution. Abortion is not possible

during some states of connection setup such as handshaking.

• There is no

for emergency call ("EN").

• The command is not applicable to data calls. Any attempt to dial a data call number from

causes the

result code "NO CARRIER" to appear.

• Parameter

only if no *# code is within the dialing string.

• See

for setting result code and call monitoring parameters.

• Any string after

and before ';' are ignored.

Examples

EXAMPLE 1

To query the location number of the phonebook entry:

TA returns the entries available in the active phonebook.

EXAMPLE 2

To dial a number from the SIM phonebook, for example the number stored to location 15:

EXAMPLE 3

To dial a phone number stored in the last dial memory on the SIM card:

AT+CPBR=1,xx

ATD>SM15;

ATD>LD9;