Siemens AC75 - Manual (Page 393)

AC75 AT Command Set
13.21 AT^SCMW
s
AC75_ATC_V01.002 Page 393 of 569 10/30/06
Confidential / Released
13.21 AT^SCMW Write Concatenated Short Messages to Memory
Writing a concatenated message to the memory is similar to writing a "normal" message, except that each seg-
ment of the concatenated message must be identified by the additional parameters , and .
To store all segments of the message one by one, the
AT^SCMW
write command must be executed for each seg-
ment.
The write commands transmits one segment of a concatenated SMS (either SMS-DELIVER or SMS-SUBMIT)
from TE to memory storage . Memory location of the stored message is returned. Message
status will be set to 'stored unsent' unless otherwise given in parameter .
Syntax
Notes
• Command is only available if
AT+CMGF
=1.
• To send or delete a concatenated short message please use the known SMS commands, see
AT+CMSS
for
sending and
AT+CMGD
for deleting.
• See notes provided for
AT+CMGW
.
Test Command
AT^SCMW=?
Response(s)
OK
Write Command
If text mode (see
AT+CMGF
=1)
AT^SCMW=
/ , [ / ][, ], , , , Text can be
entered. /
Response(s)
^SCMW:
OK
If writing fails
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS + + + + + + + - + -