6 at^sset indicate sim data ready, Ssim ready, Urc en – Siemens AC75 User Manual
Page 412: At^sset, Ac75 at command set
AC75 AT Command Set
14.6 AT^SSET
s
AC75_ATC_V01.002
Page 412 of 569
10/30/06
Confidential / Released
14.6
AT^SSET Indicate SIM data ready
After power-up and personalization (PIN entry if required) the ME starts reading data from SIM. The
command controls the presentation of the "
" URC which indicates, on the corresponding serial
channel, when the ME has finished reading SIM data. See Section
Restricted access to SIM data after SIM
for further detail.
Syntax
Unsolicited Result Code
^SSIM READY
The URC acknowledges to the user that SIM data is accessible.
Parameter Description
URC presentation mode
0
(&F)
Disable URC "
" indication.
1
Enable URC "
" indication.
Test Command
AT^SSET=?
Response(s)
^SSET:
(list of supported
s)
OK
Read Command
AT^SSET?
Response(s)
OK
ERROR
+CME ERROR:
Write Command
AT^SSET=
]
Response(s)
OK
ERROR
+CME ERROR:
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
-
+
+
+
+
+
+
-
+
-
(num)(&W)(&V)