Cgeqreq, Pdp_type, Transfer delay – Siemens AC75 User Manual
Page 326: S), (list of, Traffic handling priority, Ac75 at command set
AC75 AT Command Set
11.8 AT+CGEQREQ
s
AC75_ATC_V01.002
Page 326 of 569
10/30/06
Confidential / Released
This parameter indicates the targeted time between request to transfer an SDU at one SAP to its delivery at the
other SAP, in milliseconds.
[0]
subscribed value
10...150
(value needs to be divisible by 10 without remainder)
200...950
(value needs to be divisible by 50 without remainder)
1000...4000
(value needs to be divisible by 100 without remainder)
This parameter specifies the relative importance for handling of all SDUs belonging to the UMTS bearer com-
pared to the SDUs of the other bearers.
[0]
subscribed
1
2
3
Packet Data Protocol Type
“IP“
Notes
• If parameters are not defined, the parameter default values depend on the HLR-stored subscribed default val-
ues.
• Definitions of parameters can be found in 3GPP TS 23.107
(num)
(num)
(str)
- A75
- SXG75
- CX65
- A50
- C30
- A65
- SL75
- A35
- M75
- SX1
- C55
- M55
- SL45
- S65
- S75
- CF75
- CFX65
- AX75
- C75
- M65
- CX75
- ST60
- U15
- CF62
- C45
- C45
- Xelibri 8
- Xelibri 7
- SL45i
- SL42
- Xelibri 3
- ST55
- SL55
- C62
- C62
- Xelibri 6
- M50
- Xelibri 2
- Xelibri 4
- A57
- A36
- Xelibri 1
- Xelibri 5
- C70
- Gigaset SL 740
- Mobile Phone C35i
- 4110
- RS-485
- A55
- Gigaset SL55
- Gigaset C450 IP
- Gigaset E45
- S42
- Gigaset 150
- XT75
- SL370
- M30
- A40
- S56
- TDMA 800
- S40
- 150 H
- MT50
- C60
- SL 42
- CL50
- 1168
- C35i
- A52
- SL56
- A60
- SX66
- 4000
- MOVIEMATE 50
- XT55 AVL
- XT55
- 3000
- Gigaset 200
- Mobile
- Mux_guide_v06
- Gigaset S450 IP
- MC60
- Hicom 300E
- SF65
- CXV70
- CXV65
- 8WD44
- C61
- C56
- S45i
- MC55
- CX70
- PEGASUS-DTC AX72
- C70 CT70
- 4010
- Gigaset SL1
- Gigaset C100 DECT
- Gigaset S1
- 4000i
- Gigaset 3000 Classic