Juniper Networks SRX 210 User Manual
Srx210 services gateway, Hardware guide
Table of contents
Document Outline
- Table of Contents
- About This Guide
- Part 1: SRX210 Services Gateway Overview
- Chapter 1: Introduction to the SRX210 Services Gateway
- Chapter 2: SRX210 Services Gateway Hardware Components and Specifications
- SRX210 Services Gateway Specifications
- SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High Memory, and PoE Versions)
- SRX210 Services Gateway Built-In Interfaces
- SRX210 Services Gateway LEDs
- SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme
- SRX210 Services Gateway Cooling System
- SRX210 Services Gateway Power Supply
- Chapter 3: SRX210 Services Gateway 3G ExpressCard
- Chapter 4: SRX210 Services Gateway Power over Ethernet Support
- Chapter 5: SRX210 Services Gateway Mini-Physical Interface Modules
- Part 2: Setting Up the SRX210 Services Gateway
- Chapter 6: Preparing the Site for the SRX210 Services Gateway Installation
- Site Preparation Checklist for the SRX210 Services Gateway
- General Site Guidelines for Installing the SRX210 Services Gateway
- SRX210 Services Gateway Cabinet Requirements
- SRX210 Services Gateway Rack Requirements
- Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services Gateway
- SRX210 Services Gateway Electrical and Power Requirements
- Chapter 7: Installation Overview for the SRX210 Services Gateway
- Chapter 8: Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
- Chapter 9: Unpacking the SRX210 Services Gateway
- Chapter 10: Preparing the SRX210 Services Gateway for Installation
- Chapter 11: Installing the SRX210 Services Gateway
- Chapter 12: Connecting, Grounding, and Powering On the SRX210 Services Gateway
- Chapter 13: SRX210 Services Gateway Autoinstallation
- Chapter 14: Connecting the SRX210 Services Gateway to Management Devices
- Connecting an SRX210 Services Gateway to the J-Web Interface
- Connecting an SRX210 Services Gateway to the CLI Locally
- Connecting an SRX210 Services Gateway to the CLI Remotely
- Connecting the Modem at the SRX210 Services Gateway End
- Connecting the Modem to the Console Port on the SRX210 Services Gateway
- Connecting to the CLI at the User End for the SRX210 Services Gateway
- Chapter 15: Performing Initial Software Configuration on the SRX210 Services Gateway
- Chapter 6: Preparing the Site for the SRX210 Services Gateway Installation
- Part 3: Maintaining and Monitoring the SRX210 Services Gateway Hardware
- Chapter 16: Maintaining the SRX210 Services Gateway Hardware Components
- Chapter 17: Monitoring the SRX210 Services Gateway
- Part 4: Appendixes
- Appendix A: Safety and Regulatory Compliance Information
- SRX210 Services Gateway Definition of Safety Warning Levels
- SRX210 Services Gateway General Safety Guidelines and Warnings
- SRX210 Services Gateway Fire Safety Requirements
- SRX210 Services Gateway Installation Safety Guidelines and Warnings
- SRX210 Services Gateway Laser and LED Safety Guidelines and Warnings
- SRX210 Services Gateway Maintenance and Operational Safety Guidelines and Warnings
- SRX210 Services Gateway Electrical Safety Guidelines and Warnings
- SRX210 Services Gateway Agency Approvals
- SRX210 Services Gateway Compliance Statements for EMC Requirements
- SRX210 Services Gateway Compliance Statements for Environmental Requirements
- SRX210 Services Gateway Compliance Statements for Acoustic Noise
- Appendix B: SRX210 Services Gateway Power Guidelines, Requirements, and Specifications
- Appendix C: SRX210 Services Gateway Interface Cable Specifications and Connector Pinouts
- Appendix D: Contacting Customer Support and Returning the SRX210 Services Gateway Hardware
- Appendix A: Safety and Regulatory Compliance Information
- Index: Index