Juniper Networks SRX 210 - Manual (Page 53)

CHAPTER 6
Preparing the Site for the SRX210 Services
Gateway Installation
This chapter provides a checklist to help you prepare your site for installation of the
SRX210 Services Gateway. Read this section to make sure that your site has the proper
operating environment and equipment.
This chapter includes the following topics:
• Site Preparation Checklist for the SRX210 Services Gateway on page 37
• General Site Guidelines for Installing the SRX210 Services Gateway on page 39
• SRX210 Services Gateway Cabinet Requirements on page 39
• SRX210 Services Gateway Rack Requirements on page 40
• Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services
Gateway on page 41
• SRX210 Services Gateway Electrical and Power Requirements on page 42
Site Preparation Checklist for the SRX210 Services Gateway
The checklist in Table 16 on page 37 summarizes the tasks you need to perform when
preparing a site for installing the SRX210 Services Gateway.
Table 16: Site Preparation Checklist for the SRX210 Services Gateway
Installation
Date
and
Notes
Additional Information Item or Task
Environment
“SRX210 Services Gateway
Specifications” on page 7 Verify that environmental factors such as
temperature and humidity do not exceed device
tolerances.
Power
37 Copyright © 2013, Juniper Networks, Inc.