Juniper Networks SRX 210 - Manual (Page 160)

RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port
Figure 27 on page 144 shows the RJ-45 cable connector pinouts for Ethernet ports.
Figure 27: Ethernet Cable Connector (RJ-45)
Table 44 on page 144 describes the RJ-45 connector pinouts for the Ethernet port for
10/100 Mbps.
Table 44: RJ-45 Connector Pinouts for the Services Gateway Ethernet
Port (10/100 Mbps)
Signal Pin
TX+ 1
TX- 2
RX+ 3
Termination network 4
Termination network 5
RX- 6
Termination network 7
Termination network 8
Table 45 on page 144 describes the RJ-45 connector pinouts for the Ethernet port for 1
Gbps (1000 Mbps).
Table 45: RJ-45 Connector Pinouts for the Services Gateway Ethernet
Port (1 Gbps)
Signal Pin
BI_DA+ 1
BI_DA- 2
BI_DB+ 3
BI_DC+ 4
BI_DC- 5
Copyright © 2013, Juniper Networks, Inc. 144
SRX210 Services Gateway Hardware Guide