Juniper Networks SRX 210 - Manual (Page 31)

Table 9: SRX210 Services Gateway Front Panel Components
LEDs (continued)
Usage Description Component
The Power LED can be used
to determine if the device is
receiving power. The Power LED has the following indicator colors:
• Solid green indicates that the device is
functioning normally.
• Solid amber indicates that the Power button
has been pressed and quickly released.
• Off indicates that the device is not receiving
power.
Power LED
The HA LED can be used to
determine if high availability
is enabled on the device. The HA LED has the following indicator colors:
• Solid green indicates that all HA links are
available.
• Solid red indicates that the HA links are not
working as expected.
• Solid amber indicates that some HA links are
not working as expected.
• Off indicates that HA is not enabled.
HA LED
The 3G ExpressCard LED
provides information on the
functioning of the
ExpressCard slot. The 3G ExpressCard LED has the following
indicator colors:
• Solid green indicates that the ExpressCard is
plugged in and the data call is established.
• Solid red:
• Indicates that the ExpressCard plugged in is
faulty or not detected by the device.
• Indicates that the ExpressCard is plugged in
but not registered with the network.
• Solid amber indicates that the ExpressCard is
plugged in and registered with the network.
• Off indicates that the ExpressCard is not
plugged in.
3G
ExpressCard
LED
Ethernet Port LEDs
On the SRX210 Services Gateway, each Gigabit Ethernet port and Fast Ethernet port has
two LEDs.
Figure 5 on page 16 shows the SRX210 Services Gateway Ethernet port LEDs.
15 Copyright © 2013, Juniper Networks, Inc.
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications