Chapter 7 – Juniper Networks SRX 210 User Manual
Page 61
CHAPTER 7
Installation Overview for the SRX210
Services Gateway
This chapter includes the following topic:
•
Installation Overview for the SRX210 Services Gateway on page 45
Installation Overview for the SRX210 Services Gateway
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process as shown
in
.
Table 20: Installation Process Order for the SRX210 Services Gateway
For more information, see
Task
Step
“SRX210 Services Gateway General
Safety Guidelines and Warnings” on
page 115
Review the safety guidelines
explained.
1
“Site Preparation Checklist for the
SRX210 Services Gateway” on
page 37
Verify that you have prepared your
site for the installation of the services
gateway using the checklist.
2
“Unpacking the SRX210 Services
Gateway” on page 49
Unpack the services gateway and
verify that the parts are received.
3
Prepare the services gateway for
installation.
4
•
Installing the SRX210 Services
Gateway in a Rack on page 59
•
Installing the SRX210 Services
Gateway on a Desk on page 62
•
Installing the SRX210 Services
Gateway on a Wall on page 63
Install the services gateway.
5
45
Copyright © 2013, Juniper Networks, Inc.