Juniper Networks SRX 210 - Manual (Page 21)

Table 4: SRX210 Services Gateway Hardware Features
SRX210 Services
Gateway Power over
Ethernet SRX210 Services
Gateway High
Memory SRX210 Services
Gateway Low
Memory
Feature
1 GB 1 GB 512 MB DDR memory
Yes No No PoE support
150 watts 60 watts 60 watts Power supply adapter
NOTE: The SRX210
Services Gateway uses
a single power supply.
100 to 240 VAC 100 to 240 VAC 100 to 240 VAC AC input voltage
2 2 2 Gigabit Ethernet ports
6 6 6 Fast Ethernet ports
1 1 1 Console port
2 2 2 USB ports
1 1 1 Mini-PIM slots
Status, Alarm, HA,
Power, Mini-PIMs, 3G
ExpressCard, Port
(TX/RX and PoE) Status, Alarm, HA,
Power, Mini-PIMs, 3G
ExpressCard, Port
(TX/RX and PoE) Status, Alarm, HA,
Power, Mini-PIMs, 3G
ExpressCard, Port
(TX/RX and PoE) LEDs
1 GB 1 GB 1 GB NAND flash
1 1 1 Fans
NOTE: The PoE LED is enabled only on the PoE model of the SRX210 Services
Gateway. For non-PoE services gateways, the PoE LED remains off.
For more details on the SRX210 Services Gateway software features and licenses, see
the following guides:
• Initial Configuration for Security Devices
• Monitoring and Troubleshooting for Security Devices
Related
Documentation
• SRX210 Services Gateway Description on page 3
• SRX210 Services Gateway Specifications on page 7
5 Copyright © 2013, Juniper Networks, Inc.
Chapter 1: Introduction to the SRX210 Services Gateway