Gateway – Juniper Networks SRX 210 User Manual

Page 82

Replacing or Installing Mini-Physical Interface Modules in the SRX210 Services Gateway

Mini-Physical Interface Modules (Mini-PIMs) are circuit boards that you can install in a
device for enhanced functionality based on your requirements. They enable you to easily
add or change physical interfaces on a device.

The Mini-Physical Interface Module (Mini-PIM) slot is covered with a blank faceplate to
maintain proper airflow through the services gateway. Before installing the Mini-PIM, you
must remove the faceplate.

See the

SRX Series Services Gateways for the Branch Physical Interface Modules Hardware

Guide

for information about installing Mini-PIMs.

NOTE:

The Mini-PIMs available on the SRX210 Services Gateway are not

hot-swappable. You need to power off the device before removing or installing
Mini-PIMs.

Documentation

•

SRX210 Services Gateway Installation Safety Guidelines and Warnings on page 120

SRX210 Services Gateway Hardware Guide