Juniper Networks SRX 210 - Manual (Page 119)

Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online -------------------- CPU less FPC --------------------
1 Online -------------------- CPU less FPC --------------------
show chassis alarms
user@host > show chassis alarms
Alarm time Class Description
2009-05-11 10:47:47 UTC Major SRX210 Chassis Fan Failure
Related
Documentation
Monitoring the SRX210 Services Gateway Components Using LEDs on page 103 •
• Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions on page 105
• Monitoring the SRX210 Services Gateway Power System on page 108
• Maintaining the SRX210 Services Gateway Hardware Components on page 99
• Juniper Networks Technical Assistance Center on page 110
Monitoring the SRX210 Services Gateway Components Using LEDs
Table 37: Component LEDs on the Services Gateway
Possible Causes and
Corrective Actions
Meaning State LED
Normal condition. No action
is required. Indicates that the device is
functioning normally. Green Status LED
Normal condition. No action
is required. • The device is starting up.
• The Reset Config button
is pressed.
Amber
Contact the Juniper
Networks Technical
Assistance Center (JTAC).
See
“Juniper Networks
Technical Assistance
Center” on page 110
.
An error is detected in the
device. Red
103 Copyright © 2013, Juniper Networks, Inc.
Chapter 17: Monitoring the SRX210 Services Gateway