Juniper Networks SRX 210 - Manual (Page 63)

CHAPTER 8
Required Tools and Parts for Installing and
Maintaining the SRX210 Services Gateway
This chapter includes the following topic:
• Required Tools and Parts for Installing and Maintaining the SRX210 Services
Gateway on page 47
Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
Table 21 on page 47 lists the tools and equipments required to install and maintain the
SRX210 Services Gateway.
Table 21: Required Tools and Parts for Installing and Maintaining the
SRX210 Services Gateway
Related Topic Tools and Parts Task
• Installing the SRX210
Services Gateway in a Rack
on page 59
• Installing the SRX210
Services Gateway on a Desk
on page 62
• Installing the SRX210
Services Gateway on a Wall
on page 63
• Phillips (+) screwdriver,
number 1
• Tie wrap
Installing the SRX210 Services
Gateway
“Connecting the SRX210
Services Gateway to the
Power Supply” on page 67 Electrostatic discharge (ESD)
grounding wrist strap Connecting the SRX210
Services Gateway
“Grounding the SRX210
Services Gateway” on page 70 Phillips (+) screwdriver,
number 1 Grounding the SRX210
Services Gateway
“Packing the SRX210 Services
Gateway and Components for
Shipment” on page 151 • Blank panel to cover empty
Mini-PIM slot
• Electrostatic bag or
antistatic mat, for each
component
• Electrostatic discharge
(ESD) grounding wrist strap
Packing the SRX210 Services
Gateway
47 Copyright © 2013, Juniper Networks, Inc.