Juniper Networks SRX 210 - Manual (Page 54)

Table 16: Site Preparation Checklist for the SRX210 Services Gateway
Installation (continued)
Date
and
Notes
Additional Information Item or Task
“SRX210 Services Gateway Site
Electrical Wiring Guidelines” on
page 139
“SRX210 Services Gateway Power
Specifications and Requirements”
on page 141
• Measure distance between external power
sources and device installation site.
• Locate sites for connection of system
grounding.
• Calculate the power consumption and
requirements.
Rack Installation
“SRX210 Services Gateway Rack
Requirements” on page 40 • Verify that your rack meets the minimum
requirements.
• Plan rack location, including required space
clearances.
• Secure the rack to the floor and building
structure.
Cabinet Installation
“SRX210 Services Gateway Cabinet
Requirements” on page 39 • Verify that your cabinet meets the minimum
requirements.
• Plan the cabinet location, including required
space clearances.
Wall Installation
“Preparing the SRX210 Services
Gateway for Wall-Mount
Installation” on page 56 • Verify that the area selected meets the
minimum requirements.
• Verify that you have the required hardware to
proceed with the installation.
Desktop Installation
“Preparing the SRX210 Services
Gateway for Desk-Mount
Installation” on page 55 • Verify that the area selected meets the
minimum requirements.
• Plan the installation location, including
required space clearances and airflow
requirements.
Cables
“Interface Cable and Wire
Specifications for the SRX210
Services Gateway” on page 143 • Acquire cables and connectors.
• Review the maximum distance allowed for
each cable. Choose the length of cable based
on the distance between the hardware
components being connected.
• Plan the cable routing and management.
Related
Documentation
SRX210 Services Gateway Specifications on page 7 •
• General Site Guidelines for Installing the SRX210 Services Gateway on page 39
Copyright © 2013, Juniper Networks, Inc. 38
SRX210 Services Gateway Hardware Guide