Juniper Networks SRX 210 - Manual (Page 24)

Table 5 on page 8 provides information on the physical specifications of the device.
Table 5: SRX210 Services Gateway Specifications
Value Specification
1.73 in. x 11.02 in. x 7.13 in.
44 mm x 280 mm x 181 mm
Dimensions (H x W x D)
• 3.46 lb (1.57 kg) for SRX210 Services Gateway
without PoE (no interface modules)
• 3.55 lb (1.61 kg) for SRX210 Services Gateway with
PoE (no interface modules)
Chassis weight
• SRX210 Services Gateway Low Memory model: 27
watts
• SRX210 Services Gateway High Memory model: 28
watts
• SRX210 Services Gateway PoE model: 34 watts
(excluding PoE load)
Average power consumption
No performance degradation up to 10,000 ft (3048
m) for SRX210 Services Gateway Low Memory, High
Memory, and PoE models Altitude
5% to 90%, noncondensing Relative humidity
Normal operation ensured in temperature range of
32°F (0°C) to 104°F (+40°C)
Nonoperating storage temperature in shipping
container: –40°F (–40°C) to 158°F (70°C)
Temperature
NOTE: These specifications are estimates and subject
to change.
• SRX210 Services Gateway Low Memory: 120
BTU/hour
• SRX210 Services Gateway High Memory: 126
BTU/hour
• SRX210 Services Gateway with PoE: 164 BTU/hour
(Excluding PoE load)
Maximum thermal output
29.1 dB per EN ISO 7779 Noise level
CAUTION: Before removing or installing components of a functioning services
gateway, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the services gateway.
Copyright © 2013, Juniper Networks, Inc. 8
SRX210 Services Gateway Hardware Guide