Juniper Networks SRX 210 - Manual (Page 47)

Table 15: PoE Classes and Power Ratings on the SRX210 Services
Gateway (continued)
Maximum Power Level Output from the PoE
Port
Class
4.0 watts 1
7.0 watts 2
15.4 watts 3
30.0 watts 4
Related
Documentation
SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 9 •
• SRX210 Services Gateway Built-In Interfaces on page 11
• SRX210 Services Gateway LEDs on page 13
• SRX210 Services Gateway Mini-Physical Interface Modules on page 33
• SRX210 Services Gateway 3G ExpressCard Overview on page 23
Configuring PoE Functionality on the SRX210 Services Gateway
To enable the Power over Ethernet (PoE) feature support on your SRX210 Services
Gateway, you must configure the services gateway.
You can configure PoE using the Junos OS CLI.
For more details on configuring PoE, see the Interfaces for Security Devices .
Related
Documentation
• SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 9
• SRX210 Services Gateway Built-In Interfaces on page 11
• SRX210 Services Gateway LEDs on page 13
31 Copyright © 2013, Juniper Networks, Inc.
Chapter 4: SRX210 Services Gateway Power over Ethernet Support