beautypg.com

Juniper Networks SRX 210 User Manual

Page 58

background image

If you are mounting the device in a rack with other equipment, or if you are placing it
on the desktop near other equipment, ensure that the exhaust from other equipment
does not blow into the intake vents of the chassis.

Table 19 on page 42

provides information on the clearance requirements for maintaining

the optimum airflow and the distances for facilitating easy maintenance of the device.

Table 19: Clearance Requirements for the Services Gateway

Requirement for Clearance

Recommended
Clearance

Location

Space for service personnel to
remove and install hardware
components

NOTE:

More space is required for

installing and removing Mini-PIMs.

2.5 in. (6.35 cm)

Front of the chassis

Space for service personnel to
remove and install hardware
components

2.5 in. (6.35 cm)

Rear of the chassis

Space for cable management and
organization

2.5 in. (6.35 cm)

Between front-mounting flange
and rack or cabinet edge

Space for the cooling system to
function properly and to maintain
unrestricted airflow around the
chassis

2.5 in. (6.35 cm)

Between side of the chassis and
any non-heat-producing
surface such as a wall or
cabinet side

Space for the cooling system to
function properly and to maintain
unrestricted airflow around the
chassis

2.5 in. (6.35 cm)

Between side of the chassis and
devices that have fans or
blowers

Related

Documentation

General Site Guidelines for Installing the SRX210 Services Gateway on page 39

SRX210 Services Gateway Cabinet Requirements on page 39

SRX210 Services Gateway Rack Requirements on page 40

SRX210 Services Gateway Electrical and Power Requirements

There are factors you must consider while planning the electrical wiring and power
availability at your site. These factors include the following requirements:

Power specifications and requirements for the device

Electrical wiring guidelines for the device installation site

Power, connection, and power cord specifications for the device

Grounding guidelines and specifications for the device

Copyright © 2013, Juniper Networks, Inc.

42

SRX210 Services Gateway Hardware Guide