Juniper Networks SRX 210 - Manual (Page 131)

¡Atención! Este símbolo de aviso significa peligro. Existe riesgo para su
integridad física. Antes de manipular cualquier equipo, considerar los riesgos
que entraña la corriente eléctrica y familiarizarse con los procedimientos
estándar de prevención de accidentes.
Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation
som kan leda till personskada. Innan du utför arbete på någon utrustning
måste du vara medveten om farorna med elkretsar och känna till vanligt
förfarande för att förebygga skador.
Related
Documentation
SRX210 Services Gateway General Safety Guidelines and Warnings on page 115 •
• SRX210 Services Gateway Fire Safety Requirements on page 119
• SRX210 Services Gateway Installation Safety Guidelines and Warnings on page 120
• SRX210 Services Gateway Laser and LED Safety Guidelines and Warnings on page 124
• SRX210 Services Gateway Electrical Safety Guidelines and Warnings on page 132
• SRX210 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 127
SRX210 Services Gateway General Safety Guidelines and Warnings
This topic includes the following sections:
• General Safety Guidelines and Warnings on page 115
• Qualified Personnel Warning on page 116
• Restricted Access Area Warning on page 117
• Preventing Electrostatic Discharge Damage to the Services Gateway on page 118
General Safety Guidelines and Warnings
The following guidelines help ensure your safety and protect the services gateway from
damage. The list of guidelines might not address all potentially hazardous situations in
your working environment, so it is important that you remain alert and exercise good
judgment at all times.
• Perform only the procedures explicitly described in these topics. Ensure that only
authorized service personnel perform other system services.
• Keep the area around the chassis clear and free from dust before, during, and after
installation.
• Keep tools away from areas where people could trip on them.
• Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
• Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
115 Copyright © 2013, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information