Juniper Networks SRX 210 - Manual (Page 29)

Table 8: SRX210 Services Gateway Built-In Hardware
Interfaces (continued)
Description Specifications Interface Type
The console port can be used
as follows:
• To provide the console
interface
• To function as a
management port to log
into a device directly
• To configure the device
using the CLI
• Consists of one port
• Uses an RJ-45 serial cable
connector
• Supports the RS-232
(EIA-232) standard
Console
The Mini-PIM slot can be used
to provide LAN and WAN
functionality along with
connectivity to various media
types.
For more information about
the supported Mini-PIMs, see
the
SRX Series Services
Gateways for the Branch
Physical Interface Modules
Hardware Guide
.
Consists of one slot for a
Mini-PIM Mini-Physical Interface Module
(Mini-PIM)
NOTE: We strongly recommend that only transceivers provided by Juniper
Networks be used on an SRX210 Services Gateway. We cannot guarantee
that the interface module will operate correctly if third-party transceivers
are used. Contact Juniper Networks for the correct transceiver part number
for your device.
Related
Documentation
SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 9 •
• SRX210 Services Gateway LEDs on page 13
• SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 17
• SRX210 Services Gateway Cooling System on page 18
• SRX210 Services Gateway Power Supply on page 19
SRX210 Services Gateway LEDs
This topic includes the following sections:
• Front Panel LEDs on page 14
• Ethernet Port LEDs on page 15
13 Copyright © 2013, Juniper Networks, Inc.
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications