Juniper Networks SRX 210 - Manual (Page 165)

Power Supply 0
NOTE: In the show chassis hardware command, the Mini-Physical Interface
Module (Mini-PIM) slot number is reported as an FPC number, and the
Mini-PIM number (always 0) is reported as the PIC number.
Most components also have a serial number ID label attached to the
component body.
SRX210 Services Gateway Chassis Serial Number and Agency Labels
The SRX210 Services Gateway has a serial number ID and agency labels on the bottom
of the chassis as shown in
Figure 29 on page 149 .
Figure 29: Location of SRX210 Serial Number and Agency Labels
SRX210 Services Gateway Mini-Physical Interface Module Serial Number Label
Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable on the SRX210 Services
Gateway. Each Mini-PIM has a unique serial number. The serial number label is located
on the right side of the Mini-PIM, when the Mini-PIM is horizontally oriented (as it would
be installed on the device). The exact location might be slightly different on different
Mini-PIMs, depending on the placement of components on the Mini-PIM.
Related
Documentation
Packing the SRX210 Services Gateway and Components for Shipment on page 151 •
• Return Procedure for the SRX210 Services Gateway on page 147
149 Copyright © 2013, Juniper Networks, Inc.
Appendix D: Contacting Customer Support and Returning the SRX210 Services Gateway Hardware