Juniper Networks SRX 210 User Manual
Page 44
Table 13: SRX210 Services Gateway 3G ExpressCard Basic CLI
Commands (continued)
Command
Action
request modem wireless activate
•
request modem wireless activate iota cl-0/0/8
•
request modem wireless activate manual cl-0/0/8
msl MSL value mdn MDN value imsi IMSI value sid
SID value nid NID value sip-user-id SIP ID
sip-password SIP_PASSWORD
•
request modem wireless activate otasp cl-0/0/8
dial-string calling number
Activates the CDMA ExpressCard
•
IOTA — Activates Internet-based over air
provisioning .
•
Manual activation — Requires manual
entry of the required information.
•
OTASP — Activates over the air service
provisioning.
GSM
request modem wireless gsm sim-unlock cl-0/0/8
pin
Unlocks the GSM SIM.
set interfaces cl-0/0/ 8 cellular-options gsm-options
sim-unlock-code
Unlocks the SIM automatically on reboot
request modem wireless gsm sim-unblock cl-0/0/8
puk new-puk-number pin new-pin-number
NOTE:
You must obtain the PUK value from your
cellular service provider.
Recovers the SIM from the Pin Unlock Key
(PUK) state
When you attempt to unlock the SIM, if you
enter a wrong PIN three times in a row, the
SIM enters the PUK state.
request modem wireless gsm change-pin cl-0/0/8
old-pin current-pin-number new-pin new-pin-number
Changes the PIN on the SIM.
For more information about configuring the 3G wireless interface, see
Related
Documentation
•
SRX210 Services Gateway 3G ExpressCard Overview on page 23
•
Installing the 3G ExpressCard in the SRX210 Services Gateway ExpressCard Slot on
page 26
Copyright © 2013, Juniper Networks, Inc.
28
SRX210 Services Gateway Hardware Guide