Juniper Networks SRX 210 - Manual (Page 109)

NOTE: All network and management access settings are optional.
See Table 34 on page 93 Table 35 on page 94 summarize the configuration
details for the initial setup.
6. Click Commit on the Review & Commit page to apply the configuration.
NOTE: After you configure the basic settings, the J-Web Setup wizard
redirects you to the J-Web pages where you can continue working in the
J-Web interface.
Configuring Basic System Properties
Table 34 on page 93 and Table 35 on page 94 summarizes the configuration details for
initial setup.
Table 34: Required Setup Fields
Your Action Field Setup Wizard Page
Read the introduction page for
basic instructions on using the
setup wizard. Click
Start to
continue.
Introduction
Configure System: Identification
Type the name of the services
gateway. Hostname
Type the name of the network
or subnetwork to which the
services gateway belongs Domain Name
Type the password that the
user root will use to log in to the
device. Root Password (required)
Retype the root password. Verify Root Password
(required)
Configure J-Web Preferences
Specify the tab you want to
appear when J-Web starts. J-Web starting page options
Specify when you want J-Web
to commit your configuration
changes. J-Web commit options
93 Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Performing Initial Software Configuration on the SRX210 Services Gateway