IBM S544-5361-01 - Manual (Page 72)

4–22 IBM Network Color Printer Operator’s Guide
5. You see NEW PASSWORD on the first line of the display panel. Enter the
new password as follows. The password can be any combination of
letters and numbers up to 20 characters.
a. Use the Menu Scrolling push buttons (
↑↓
) to change the first
alphanumeric character of the password on the second line of the
display panel.
b. Use the right Cursor Position push button (
→
) to advance the cursor
to the next character position.
c. Repeat step 1 and step 2 for each character in the password.
d. When you finish entering the password, press the Enter push button.
6. You see VERIFY PASSWORD on the first line of the display panel. Repeat
step 5.
7. If the password you entered in step 6 matches the one you entered in
step 5, you see PASSWORD CHANGED on the display panel. If not, proceed
to step 8.
a. Press the Menu push button 3 times. You see EXIT SETUP on the first
line of the display panel and the default setting, NO , on the second line.
b. Press the down Menu Scrolling push button (
↓
) to see YES on the
second line.
c. Press the Enter push button. You see SAVE CHANGES on the first line
of the display panel and the default setting, YES , on the second line.
Press the Enter push button to save the changes.
8. If the password you entered in step 6 does not match the one you entered
in step 5, you see PASSWORD INCORRECT on the display panel. Press the
Enter push button. You see TRY AGAIN on the first line of the display panel.
Press the Enter push button and repeat step 6.
The new password is effective until you change it again.