IBM S544-5361-01 - Manual (Page 27)

Chapter 1. Welcome to the IBM Network Color Printer
1–13
Turning the Printer On and Off
This section tells you how to turn the printer on and off. When you turn the
printer and its connected devices on or off, follow the procedure below.
Attention:
Never turn the printer on without a fuser oil bottle and a used toner bottle installed.
Turning the Printer On
Use the following procedure to turn on power to the printer.
1. Turn on any devices connected to the printer (such as a SCSI hard drive
or CD ROM).
2. Press the power switch to turn on the printer (the switch remains pressed).
3. Turn on the host computer.
Note: If you see an error message after you turn on the printer, see
“Understanding POST Error Messages” on page 7–2 to learn what
to do.
Turning the Printer Off
Attention:
Never turn off the printer while it is printing. If power to the printer is accidentally lost,
open the paper jam clearance areas (see “Clearing Paper Jams” on page 6–3) and
remove any paper left inside before turning on the printer again.
Use the following procedure to turn off power to the printer.
1. Turn off the host computer.
2. Turn off any devices connected to the printer (such as a SCSI hard drive
or CD ROM).
3. Press the power switch to turn off the printer (the switch is released).