Measure the left margin of the test print, When the left margin is 2.8mm, 8mm – 2.0mm = 0.8mm (decrease the margin by 0 – IBM S544-5361-01 User Manual

Page 135: For the example above, turn the dial from 5 to, Print another test print and check if the left

Chapter 6. Diagnosing Printer Problems

6–21

6. Measure the left margin of the test print.

If the left margin is 2 mm (0.08 inches), you do not have to adjust the
registration. If the left margin is wider or narrower than 2 mm (0.08 inches),
calculate the difference. Use this measurement to adjust the registration
with the side registration adjustment dial.

Example

When the left margin is 2.8 mm

2.8 mm – 2.0 mm = 0.8 mm (Decrease the margin by 0.8 mm.)
0.8 mm

0.4 mm = 2 (Decrease the dial value by 2.)

7. For the example above, turn the dial from 5 to 3. Use a screwdriver or your

hand to turn the dial.

8. Print another test print and check if the left margin is 2 mm (0.08 inches).

If the margin is still not 2 mm (0.08 inches), repeat step 6 through step 8.