Loading paper in the auxiliary tray, Adjust the paper guides to the paper size you w, Tap a stack of paper on a flat surface to align – IBM S544-5361-01 User Manual

Page 41: Insert the paper stack as far as it can go into

Text mode
Original mode

Chapter 3. Loading Paper and Transparencies

3–7

Loading Paper in the Auxiliary Tray

Note: Make sure that the paper meets the printer’s specifications (see

“Choosing Paper” on page 2–2) and that it has been in the printer
environment for at least 24 hours before you use it. (This is especially
important if you are in a climate with high humidity.)

Use the following procedure to load paper in the auxiliary tray.

1. Adjust the paper guides to the paper size you want.

2. Tap a stack of paper on a flat surface to align its edges.

3. Insert the paper stack as far as it can go into the printer. Make sure that the

print side faces down and the top of the page goes into the printer first.