AVer NXU8000 - Manual (Page 80)

68
Name Function
(10) Export Export includes Snapshot, Print, Output Video Clip, and Backup function.
Snapshot: Capture and save the screen shot either in *.jpg or *.bmp
format.
Print: Print the screen shot.
Output Video Clip: Save the segmented file in *.mpg, *.avi, or *.dvr
format (see also
Chapter 4.8 ).
Backup: Save the playback file to USB device or DVD-ROM disk(see
also Chapter
5.6 Backup Setting )
(11) Segment Keep a portion of the recorded video (see also Chapter 4.8 ).
(12) Full screen View in Playback-compact mode. To return, press the right button of the
mouse or ESC on the keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to toggle
to only display one of the video in the multiple-screen mode or all.
i
When there are dual monitors with 32 channels, the full screen mode will split into 16
channels on each monitor.
(13) Event log Show the record of activities that take place in the system. To filter the
records, select and click the option button to only display Event, System,
Operation, Network or POS.
(14) Bookmark Mark a reference point when previewing the recorded video file to which
you may return for later reference. You may also set it to protect the file.
(See also
Chapter 4.9 )
(15) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and
Second. (See also
Chapter 4.10 )
(16) Find Next Search for the next event or changes in the motion detector frame. You can
use this when you are using Intelligent Search or Event Search function.
(17) Event Search Search from the recorded activities that take place in the system (i.e.,
Sensor, Motion, Video Loss, POS). (See also
Chapter 4.11 )
(18) Intelligent
Search
Search the changes in the motion detector frame (See also Chapter 4.12 ).
(19) Audio Enable/disable volume. To adjust audio volume, drag and move the audio
volume bar beside the audio button.