AVer NXU8000 User Manual
Page 176
164
Trigger if once: Send out the alarm when the selected camera match the illegal
entry has selected.
Trigger if the amount exceeds: Send out the alarm when the selected camera and
illegal entry times match the illegal entry has selected.
i
Only the camera has been setup in Object Counting will be available for
selecting in Illegal Entry.
- Enable/disable the POS Keyword check box, to scan the data from the POS if it matches the
keyword (see also
).
- Enable/disable the Alarm Message check box, to active with external alarm message by your
own program. For the detail configuration, please contact the local reseller.
- Enable/disable the Alarm Button check box, to active manual alarm function (see also
Chapter 4.3#(17)
). To define alarm message of manually alarm trigger. Click alarm button and
select the alarm button # and fill in the description of alarm button.
6.
In (5) Alarm Reset, click the camera number (use and to select the alarm) to set the reset
condition of alarm. Once alarm is reset, all alarm action will stop at the moment. If the sensor
normal status is high, set the sensor condition to low.
To set sensor status of IP camera, click IP Camera Sensor. In IP Camera Alarm Setting window,
click High/Low to set sensor status.