AVer NXU8000 User Manual
Page 66
54
Name
Function
(2) Split Screen
Mode
Select from 7 different split screen types to view all the camera, or one
camera over the other or alongside on a single screen. It also allows you to
switch and view different camera number.
i
- If there are only 4 came
ras, you won’t be able to switch to 9, 16, 13, and 32 split screen
mode.
- The DVR system will save the current operating mode (split screen mode, auto scan, full
screen, and compact mode status) when shutdown DVR application and apply the mode
status for next login.
- When you are in single screen mode, Right-click and Drag a square on the area you
want to enlarge. Using left button of mouse click on the enlarge screen area and user
can move the screen for viewing. Right-click on screen again will back to normal view.
-
In multiple-screen mode, user can re-arrange the channels
’ display order. Right click
the video screen of the channel and Drag on where you want to relocate it. However, the
changed display order of channel only applies in preview mode and wouldn
’t apply in
playback.
(3) Record
Start/stop video recording. The authorize password is required for disabling
the record function. The authorization dialog will show the warning message
to inform the user for stop recording.
i
Please make sure the cursor is located on Password column if user
has call out virtual keyboard for entering ID and password.
(4) Emap
Display the map in each area, and the location of camera/ sensor/ relay and
the warning (see also
).
(5) Network
Enable/disable remote system access. This feature allows you to access
DVR server from a remote location via internet connection (see also
). The authorize password is required for disabling the network function.
The authorization dialog will show the warning message to inform the user
for disabling network.
i
Please make sure the cursor is located on Password column if user
has call out virtual keyboard for entering ID and password.